Nonlinear bending analysis of anisotropic laminated tubular beams based on higher-order theory subjected to different kinds of distributed loads

Tao Liu, Zhimin Li, Sun Jin. International Journal of Pressure Vessels and Piping, 2018 163: 23-35 <Link>

Compliant assembly analysis including initial deviations and geometric nonlinearity, Part II: plate structure

Tao Liu, Zhimin Li, Sun Jin, Wei Chen. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2018 <Link>

Compliant assembly analysis including initial deviations and geometric nonlinearity, Part I: beam structure

Tao Liu, Zhimin Li, Sun Jin, Wei Chen. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2018 <Link>

A variation analysis method for linkage mechanism with consideration of joint clearance and deformation

Tao Liu, Zhimin Li, Sun Jin, Wei Chen. International Journal of Precision Engineering and Manufacturing, 2018 19(10): 1495-1506 <Link>

Flow channel design for metallic bipolar plates in proton exchange membrane fuel cells: Experiments

Qiu D, Peng L, Yi P, Lai X, Lehnert W. Energy Conversion And Management, 2018 174:814-823 <Link>

Mechanical degradation of proton exchange membrane along the MEA frame in proton exchange membrane fuel cells

Qiu D, Peng L, Liang P, Yi P, Lai X. Energy, 2018 165:210-222 <Link>

Electrical resistance and microstructure of typical gas diffusion layers for proton exchange membrane fuel cell under compression

Qiu D, Janßen H, Peng L, Irmscher P, Lai X, Lehnert W. Applied Energy, 2018 231:127-137 <Link>

Contact resistance prediction of proton exchange membrane fuel cell considering fabrication characteristics of metallic bipolar plates

Liang P, Qiu D, Peng L, Yi P, Lai X, Ni J. Energy Conversion and Management, 2018 169:334-44 <Link>

Co-effect of microstructure and surface constraints on plastic deformation in micro- and mesoscaled forming process

Mao, M.Y., Peng, L.F., Fu, M.W. et al. Int J Adv Manuf Technol, 2018 98: 1861 <Link>

Experimental and numerical investigation on thin sheet metal roll forming process of micro channels with high aspect ratio

Huang J, Deng Y, Yi P, et al. The International Journal of Advanced Manufacturing Technology, 2018 : 1-13 <Link>