Compliant Assembly Variation Analysis of Scalloped Segment Plates With a New Irregular Quadrilateral Plate Element Via ANCF

Yu H, Zhao C, Lai X. Journal of Manufacturing Science and Engineering, 2018 140(9): 091006 <Link>

Design and kinematic analysis of a spherical parallel manipulator using concurrent planar parallelogram linkages

Chen G, Yu W, Wang H, et al. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2018 <Link>

Identification of canonical basis of screw systems using general-special decomposition

Chen G, Wang H, Lin Z, et al. Journal of Mechanisms and Robotics, 2018 10(3): 034501 <Link>

A general approach to the large deflection problems of spatial flexible rods using principal axes decomposition of compliance matrices

Chen G, Zhang Z, Wang H. Journal of Mechanisms and Robotics, 2018 10(3): 031012 <Link>

A New Type of Planar 2-DOF Remote Center-of-Motion Mechanisms Inspired by the Peaucellier-Lipkin Straight-line Linkage

Chen G, Wang J, Wang H. Journal of Mechanical Design, 2018 <Link>

A coupled model for the prediction of surface variation in face milling with complex workpiece geometry

Shun Liu, Sun Jin, Xuiping Zhang, Kun Chen, Ang Tian, Lifeng Xi. ASME Journal of Manufacturing Science and Engineering-Transactions of the ASME, 2018 <Link>

Effect of Spring-in Deviation on Fatigue Life of Composite Elevator Assembly

Hua Wang. Applied Composite Materials, 2018 25(6), 1357-1367 <Link>

Nonlinear bending analysis of a 3D braided composite cylindrical panel subjected to transverse loads in thermal environments

Yixi Zhao, Tao Liu, Zhimin Li. Chinese Journal of Aeronautics, 2018 31(8): 1716-1727 <Link>

Vibration analysis of sandwich plates with carbon nanotube-reinforced composite face-sheets

Miao Wang, Zhimin Li, Pizhong Qiao. Composite Structures, 2018 200: 799-809 <Link>

Postbuckling behavior of shear deformable anisotropic laminated cylindrical shell under combined external pressure and axial compression

Zhimin Li, Tao Liu, Deqing Yang. Composite Structures, 2018 198: 84-108 <Link>