1994年 - 1997年：天津大学机械制造专业，博士
1987年 - 1990年：河北工学院机械学专业，硕士
1980年 - 1984年：河北工学院机械制造工艺及设备，学士

1984年 - 1987年：河北工学院机械工程学院，助教
1990年 - 1994年：河北工学院机械工程学院，讲师
1997年 - 1999年：上海交通大学机械与动力工程学院，博士后
2000年 - 2001年：上海交通大学机械与动力工程学院，副教授
2001年 4月 - 8月：密西根大学吴贤铭制造中心，访问学者
2001年 - 至 今：上海交通大学机械与动力工程学院，教授
2012年 - 至 今：上海市复杂薄板结构数字化制造重点实验室，主任
2001年 - 至 今：上海交通大学机械与动力工程学院薄板结构制造研究所，所长

1）2020年 - 2023年，国家重点研发计划，“长寿命低成本质子交换膜燃料电池极板专用基材批量化制造技术”，项目负责人
2）2019年 - 2021年，国防科技创新特区项目，负责人
3）2019年 - 2023年，国家自然科学基金重点项目，“跨尺度构件形性协同塑性成形理论”，参与人
4）2016年 - 2021年，临港地区智能制造产业专项，“燃料电池金属双极板智能制造技术及示范车间”，负责人
5）2014年 - 2018年，973项目，“新一代超大型运载火箭薄壁结构制造的科学问题”，首席科学家
6）2013年 - 2017年，国家自然科学基金重点项目，“薄膜表面微细结构直接热辊连续成形的介观尺度效应及控形控性新方法”，负责人
7）2009年 - 2012年， 国家自然科学基金重大国际（地区）合作项目，“质子交换膜燃料电池极板制造与电堆装配的理论与技术基础”，负责人
8）2006年 - 2008年，国家自然科学基金，“介观尺度微铣削过程仿真建模与表面形貌预测”，负责人
9）2006年 - 2009年，国家863计划，“基于冲压成形的质子交换膜电堆金属双极板制造技术”，第二负责人
10）2009年 - 2010年，上汽集团研发项目，“质子交换膜燃料电池用双极板制造技术研究”，负责人
11）2005年 - 2007年，上海市科委基础研究重点项目，“复杂制造过程的多维仿真理论与方法研究”，负责人
12）2004年 - 2006年，国家自然科学基金，“基于多属性有向图与矩阵映射的薄板产品装配构形设计的数字化建模”，负责人
13）2008年 - 2010年，Project of GM - SJTU Collaborative Research Laboratory in Advanced Manufacturing Processes，”Joint performance & quality for lightweight and dissimilar materials“，Co-PI
14）2002年 - 2005年，美国通用汽车公司R&D合作项目，“Research on adaptive strategy in auto-body Assembly Process design”，负责人
15）2008年 - 2010年，美国福特汽车公司URP项目，”Process robustness & quality control for low cost manufacturing“，负责人

专著
1. Xin Min Lai, Ming Wang Fu, Lin Fa Peng, Sheet Metal Meso- and Microforming and Their Industrial Applications, Taylor & Francis Group, June, 2018.

2021年代表性论文
1. Peng Linfa, Xu Zhutian, Mao Mengyun, Lai Xinmin, Fu Mingwang. Damage mechanisms of material in single-cone scratching. Journal of Manufacturing Science and Engineering – Transactions of the ASME, 2021, 143(6): 061013.
2. Zhang Rui, Xu Zhutian, Peng Linfa, Lai Xinmin, Fu Mingwang. Modelling of ultra-thin steel sheet in two-stage tensile deformation considering strain path change and grain size effect and application in multi-stage microforming. International Journal of Machine Tools & Manufacture, 2021, 164: 103713.
3. Zhang Weixin, Gao Jie, Deng Yujun, Peng Linfa, Yi Peiyun, Lai Xinmin, Lin Zhongqin. Tunable superhydrophobicity from 3D hierarchically nano-wrinkled micro-pyramidal architectures. Advanced Functional Materials, 2021: 2101068.
4. Zhang Di, Peng Linfa, Yi Peiyun, Lai Xinmin. Electronic transport and corrosion mechanisms of graphite-like nanocrystalline carbon films used on metallic bipolar plates in proton-exchange membrane fuel cells. ACS Applied Materials & Interfaces, 2021, 13(3): 3825-3835.
5. Peng Linfa, Wan Yue, Qiu Diankai, Yi Peiyun, Lai Xinmin. Dimensional tolerance analysis of proton exchange membrane fuel cells with metallic bipolar plates. Journal of Power Sources, 2021, 481: 228927.
6. Lei Sun, Xu Zhutian, Peng Linfa, Lai Xinmin. Effect of grain size on the ductile-brittle fracture behavior of commercially pure titanium sheet metals. Materials Science & Engineering A, 2021, 822: 141630.

2020 年代表性论文
7. Li Yunyong, Zhao Yong, Yu Haidong, Lai Xinmin. Modeling deviation propagation of compliant assembly considering form defects based on basic deviation field. Assembly Automation, 2019, 39:226-242.
8. Huang Jihui, Xu Zhutian, Li Xianan, Peng Linfa, Lai Xinmin. An experimental study on a rapid micro imprinting process. Journal of Materials Processing Technology, 2020, 283: 116716.
9. Qiu Diankai, Peng Linfa, Tang Jiayu, Lai Xinmin. Numerical analysis of air-cooled proton exchange membrane fuel cells with various cathode flow channels. Energy, 2020, 198: 117334.
10. Zhang Di, Peng Linfa, Li Xiaobo, Yi Peiyun, Lai Xinmin. Controlling the nucleation and growth orientation of nanocrystalline carbon films during plasma-assisted deposition: a reactive molecular dynamics/monte carlo study. Journal of the American Chemical Society, 2020,142:2617-27.
11. Xu Zhutian, Huang Jihui, Mao Mengyun, Peng Llinfa, Lai Xinmin. An investigation on the friction in a micro sheet metal roll forming processes considering adhesion and ploughing. Journal of Materials Processing Technology, 2020, 285: 116790.
12. Peng Linfa, Shao Heng, Qiu Diankai, Yi Peiyun, Lai Xinmin. Investigation of the non-uniform distribution of current density in commercial-size proton exchange membrane fuel cells. Journal of Power Sources, 2020, 453: 227836.
13. Liu Wenqing, Qiu Diankai, Peng Linfa, Yi Peiyun, Lai Xinmin. Mechanical degradation of proton exchange membrane during assembly and running processes in proton exchange membrane fuel cells with metallic bipolar plates. International Journal of Energy Research, 2020, 44:8622-34.
14. Xu Zhutian, Peng Linfa, Lai Xinmin. Investigation on the roll-to-plate microforming of riblet features with the consideration of grain size effect. The International Journal of Advanced Manufacturing Technology, 2020, 109: 2055-2064.
15. Li Xiaobo, Hou Kun, Qiu Diankai, Yi Peiyun, Lai Xinmin. A first principles and experimental study on the influence of nitrogen doping on the performance of amorphous carbon films for proton exchange membrane fuel cells. Carbon, 2020, 167: 219-229.

2019年代表性论文
16. Wang Jin, Peng Linfa, Deng Yujun, Lai Xinmin, Fu Mingwang, Ni Jun. A finite strain thermodynamically-based constitutive modeling and analysis of viscoelastic-viscoplastic deformation behavior of glassy polymers. International Journal of Plasticity, 2019, 122: 135-163.
17. Qiu Diankai, Peng Linfa, Lai Xinmin, Ni Meng, Werner Lehnert. Mechanical failure and mitigation strategies for the membrane in a proton exchange membrane fuel cell, Renewable and Sustainable Energy Reviews, 2019, 113: 109289.
18. Shao Heng, Qiu Diankai, Peng Linfa, Yi Peiyun, Lai Xinmin. In-situ measurement of temperature and humidity distribution in gas channels for commercial-size proton exchange membrane fuel cells. Journal of Power Sources, 2019, 412: 717–724.
19. Xu Xun, Yu Haidong, Li Yunyong, Lai Xinmin. Compliant assembly deviation analysis of large-scale thin-walled structures in different clamping schemes via ANCF. Assembly Automation, 2019.
20. Yu Haidong, Xu Xun, Zheng Bin, Lai Xinmin. Welding-induced buckling prediction for large thin-walled cylindrical structures with non-uniform stress fields by friction stir welding. The International Journal of Advanced Manufacturing Technology, 2019, 103(9): 4635-4647.
21. Li Yunyong, Zhao Yong, Yu Haidong, Lai Xinmin. Modeling deviation propagation of compliant assembly considering form defects based on basic deviation fields. Assembly Automation, 2019, 39(1): 226-242.
22. Deng Yujun, Wang Jin, Yi Peiyun, Peng Linfa, Lai Xinmin, Lin Zhongqin. Numerical studies on size effect behaviors of glassy polymers based on strain gradient elastoviscoplastic model. Journal of Applied Mechanics, 2019, 86(2): 021001.

2018年代表性论文
23. Gan Tian, Yu Zhongqi, Zhao Yixi, Evsyukov SA, Lai Xinmin. Effects of backward path parameters on formability in conventional spinning of aluminum hemispherical parts. Transactions of Nonferrous Metals Society of China, 2018, 28: 328-339.
24. Yi Peiyun, Zhang Di, Peng Linfa, Lai Xinmin. Impact of film thickness on defects and the graphitization of nanothin carbon coatings used for metallic bipolar plates in proton exchange membrane fuel cells. ACS Applied Materials & Interfaces, 2018, 10(40): 34561-72.
25. Zhang Weixin, Yi Peiyun, Peng Linfa, Lai Xinmin. Strategy of alternating bias voltage on corrosion resistance and interfacial conductivity enhancement of TiCx/a-C coatings on metallic bipolar plates in PEMFCs. Energy, 2018, 162: 933-43.
26. Liang Peng, Qiu Diankai, Peng Linfa, Yi Peiyun, Lai Xinmin, Ni Jun. Contact resistance prediction of proton exchange membrane fuel cell considering fabrication characteristics of metallic bipolar plates. Energy Conversion and Management, 2018, 169: 334-44.
27. Qiu Diankai, Peng Linfa, Liang Peng, Yi Peiyun, Lai Xinmin, Mechanical degradation of proton exchange membrane along the MEA frame in proton exchange membrane fuel cells. Energy, 2018, 165: 210-222.
28. Qiu Diankai, Peng Linfa, Yi Peiyun, Lai Xinmin, Lehnert W, Flow channel design for metallic bipolar plates in proton exchange membrane fuel cells: Experiments. Energy Conversion And Management, 2018,174: 814-823.
29. Yu Haidong, Zhao Chunzhang, Lai Xinmin. Compliant assembly variation analysis of scalloped segment plates with a new irregular quadrilateral plate element via ANCF. Journal of Manufacturing Science and Engineering, 2018, 140(9): 091006.

2017年代表性论文
30. Deng Yujun, Peng Linfa, Lai Xinmin Lai, Fu Mingwang, Lin Zhongqin. Constitutive modeling of size effect on deformation behaviors of amorphous polymers in micro-scaled deformation. International Journal of Plasticity, 2017, 89: 197-222.
31. Bi Feifei, Hou Kun, Yi Peiyun, Peng Linfa, Lai Xinmin. Mechanisms of growth, properties and degradation of amorphous carbon films by closed field unbalanced magnetron sputtering on stainless steel bipolar plates for PEMFCs. Applied Surface Science, 2017, 422: 921-931.
32. Jiang Tianhao, Peng Linfa, Yi Peiyun, Lai Xinmin. Investigation of deformation behavior of SS304 and pure copper subjected to electrically assisted forming process. Journal of Manufacturing Science and Engineering, 2017, 139(1): 011004.
33. Qiu Diankai, Peng Linfa, Yi Peiyun, Lai Xinmin. A micro contact model for electrical contact resistance prediction between roughness surface and carbon fiber paper. International Journal of Mechanical Sciences, 2017, 124: 37-47.
34. Wang Jin, Yi Peiyun, Deng Yujun, Peng Linfa, Lai Xinmin, Ni Jun. Recovery behavior of thermoplastic polymers in micro hot embossing process. Journal of Materials Processing Technology, 2017, 243: 205-216.
35. Yi Peiyun, Zhang Chengpeng, Peng Linfa, Lai Xinmin. Flexible silver-mesh electrodes with moth-eye nanostructures for transmittance enhancement by double-sided roll-to-roll nanoimprint lithography. RSC Advances, 2017, 7(77): 48835-48840.
36. Zhang Chengpeng, Yi Peiyun, Peng Linfa, Lai Xinmin, Chen Jie, Huang Meizhen, Ni Jun. Continuous fabrication of nanostructure arrays for flexible surface enhanced Raman scattering substrate. Scientific Reports, 2017, 7: 39814.
37. Zhang Chengpeng, Zhu Yuwen, Yi Peiyun, Peng Linfa, Lai Xinmin. Fabrication of flexible silver nanowire conductive films and transmittance improvement based on moth-eye nanostructure array. Journal of Micromechanics and Microengineering, 2017, 27(7): 075010.
38. Bi Feifei, Li Xiaobo, Yi Peiyun, Hou Kun, Peng Linfa, Lai Xinmin. Characteristics of amorphous carbon films to resist high potential impact in PEMFCs bipolar plates for automotive application. International Journal of Hydrogen Energy, 2017, 42(20): 14279-14289.
39. Yu Haidong, Zheng Bin, Lai Xinmin. A modeling study of welding stress induced by friction stir welding. Journal of Materials Processing Technology, 2017, 254(4): 213-220.
40. Peng Linfa, Xu Zhutian, Fu Mingwang, Lai Xinmin. Forming limit of sheet metals in meso-scale plastic forming by using different failure criteria. International Journal of Mechanical Sciences, 2017, 120: 190-203.

2016年代表性论文
41. Peng Linfa, Mao Mengyun, Fu Mingwang, Lai Xinmin. Effect of grain size on the adhesive and ploughing friction behaviors of polycrystalline metals in forming process. International Journal of Mechanical Sciences, 2016, 117: 197-209.
42. Bi Feifei, Peng Linfa, Yi Peiyun, Lai Xinmin. Multilayered Zr–C/a-C film on stainless steel 316L as bipolar plates for proton exchange membrane fuel cells. Journal of Power Sources. 2016, 314: 58-65.
43. Peng Linfa, Wu Hao, Shu Yunyi, Yi Peiyun, Deng Yujun, Lai Xinmin. Roll-to-roll hot embossing system with shape preserving mechanism for the large-area fabrication of microstructures. Review of Scientific Instruments, 2016, 87(10): 105120.
44. Wu Hao, Yi Peiyun, Peng Linfa, Lai Xinmin. Study on bubble defects in roll-to-roll UV imprinting process for micropyramid arrays I. experiments. Journal of Vacuum Science & Technology, 2016, 34(2): 021201.
45. Peng Linfa, Wu Hao, Yi Peiyun, Lai Xinmin. Study on bubble defects in roll-to-roll UV imprinting process for micropyramid arrays II: Numerical study. Journal of Vacuum Science & Technology, 2016, 34(5): 051203.
46. Mao Mengyun, Peng Linfa, Yi Peiyun, Lai Xinmin. Modeling of the friction behavior in metal forming process considering material hardening and junction growth. Journal of Tribology, 2016, 138(1): 012202.专著

1. Xin Min Lai, Ming Wang Fu, Lin Fa Peng, Sheet Metal Meso- and Microforming and Their Industrial Applications, Taylor & Francis Group, June, 2018.

2021年代表性论文
1. Peng Linfa, Xu Zhutian, Mao Mengyun, Lai Xinmin, Fu Mingwang. Damage mechanisms of material in single-cone scratching. Journal of Manufacturing Science and Engineering – Transactions of the ASME, 2021, 143(6): 061013.
2. Zhang Rui, Xu Zhutian, Peng Linfa, Lai Xinmin, Fu Mingwang. Modelling of ultra-thin steel sheet in two-stage tensile deformation considering strain path change and grain size effect and application in multi-stage microforming. International Journal of Machine Tools & Manufacture, 2021, 164: 103713.
3. Zhang Weixin, Gao Jie, Deng Yujun, Peng Linfa, Yi Peiyun, Lai Xinmin, Lin Zhongqin. Tunable superhydrophobicity from 3D hierarchically nano-wrinkled micro-pyramidal architectures. Advanced Functional Materials, 2021: 2101068.
4. Zhang Di, Peng Linfa, Yi Peiyun, Lai Xinmin. Electronic transport and corrosion mechanisms of graphite-like nanocrystalline carbon films used on metallic bipolar plates in proton-exchange membrane fuel cells. ACS Applied Materials & Interfaces, 2021, 13(3): 3825-3835.
5. Peng Linfa, Wan Yue, Qiu Diankai, Yi Peiyun, Lai Xinmin. Dimensional tolerance analysis of proton exchange membrane fuel cells with metallic bipolar plates. Journal of Power Sources, 2021, 481: 228927.
6. Lei Sun, Xu Zhutian, Peng Linfa, Lai Xinmin. Effect of grain size on the ductile-brittle fracture behavior of commercially pure titanium sheet metals. Materials Science & Engineering A, 2021, 822: 141630.

2020 年代表性论文
7. Li Yunyong, Zhao Yong, Yu Haidong, Lai Xinmin. Modeling deviation propagation of compliant assembly considering form defects based on basic deviation field. Assembly Automation, 2019, 39:226-242.
8. Huang Jihui, Xu Zhutian, Li Xianan, Peng Linfa, Lai Xinmin. An experimental study on a rapid micro imprinting process. Journal of Materials Processing Technology, 2020, 283: 116716.
9. Qiu Diankai, Peng Linfa, Tang Jiayu, Lai Xinmin. Numerical analysis of air-cooled proton exchange membrane fuel cells with various cathode flow channels. Energy, 2020, 198: 117334.
10. Zhang Di, Peng Linfa, Li Xiaobo, Yi Peiyun, Lai Xinmin. Controlling the nucleation and growth orientation of nanocrystalline carbon films during plasma-assisted deposition: a reactive molecular dynamics/monte carlo study. Journal of the American Chemical Society, 2020,142:2617-27.
11. Xu Zhutian, Huang Jihui, Mao Mengyun, Peng Llinfa, Lai Xinmin. An investigation on the friction in a micro sheet metal roll forming processes considering adhesion and ploughing. Journal of Materials Processing Technology, 2020, 285: 116790.
12. Peng Linfa, Shao Heng, Qiu Diankai, Yi Peiyun, Lai Xinmin. Investigation of the non-uniform distribution of current density in commercial-size proton exchange membrane fuel cells. Journal of Power Sources, 2020, 453: 227836.
13. Liu Wenqing, Qiu Diankai, Peng Linfa, Yi Peiyun, Lai Xinmin. Mechanical degradation of proton exchange membrane during assembly and running processes in proton exchange membrane fuel cells with metallic bipolar plates. International Journal of Energy Research, 2020, 44:8622-34.
14. Xu Zhutian, Peng Linfa, Lai Xinmin. Investigation on the roll-to-plate microforming of riblet features with the consideration of grain size effect. The International Journal of Advanced Manufacturing Technology, 2020, 109: 2055-2064.
15. Li Xiaobo, Hou Kun, Qiu Diankai, Yi Peiyun, Lai Xinmin. A first principles and experimental study on the influence of nitrogen doping on the performance of amorphous carbon films for proton exchange membrane fuel cells. Carbon, 2020, 167: 219-229.

2019年代表性论文
16. Wang Jin, Peng Linfa, Deng Yujun, Lai Xinmin, Fu Mingwang, Ni Jun. A finite strain thermodynamically-based constitutive modeling and analysis of viscoelastic-viscoplastic deformation behavior of glassy polymers. International Journal of Plasticity, 2019, 122: 135-163.
17. Qiu Diankai, Peng Linfa, Lai Xinmin, Ni Meng, Werner Lehnert. Mechanical failure and mitigation strategies for the membrane in a proton exchange membrane fuel cell, Renewable and Sustainable Energy Reviews, 2019, 113: 109289.
18. Shao Heng, Qiu Diankai, Peng Linfa, Yi Peiyun, Lai Xinmin. In-situ measurement of temperature and humidity distribution in gas channels for commercial-size proton exchange membrane fuel cells. Journal of Power Sources, 2019, 412: 717–724.
19. Xu Xun, Yu Haidong, Li Yunyong, Lai Xinmin. Compliant assembly deviation analysis of large-scale thin-walled structures in different clamping schemes via ANCF. Assembly Automation, 2019.
20. Yu Haidong, Xu Xun, Zheng Bin, Lai Xinmin. Welding-induced buckling prediction for large thin-walled cylindrical structures with non-uniform stress fields by friction stir welding. The International Journal of Advanced Manufacturing Technology, 2019, 103(9): 4635-4647.
21. Li Yunyong, Zhao Yong, Yu Haidong, Lai Xinmin. Modeling deviation propagation of compliant assembly considering form defects based on basic deviation fields. Assembly Automation, 2019, 39(1): 226-242.
22. Deng Yujun, Wang Jin, Yi Peiyun, Peng Linfa, Lai Xinmin, Lin Zhongqin. Numerical studies on size effect behaviors of glassy polymers based on strain gradient elastoviscoplastic model. Journal of Applied Mechanics, 2019, 86(2): 021001.

2018年代表性论文
23. Gan Tian, Yu Zhongqi, Zhao Yixi, Evsyukov SA, Lai Xinmin. Effects of backward path parameters on formability in conventional spinning of aluminum hemispherical parts. Transactions of Nonferrous Metals Society of China, 2018, 28: 328-339.
24. Yi Peiyun, Zhang Di, Peng Linfa, Lai Xinmin. Impact of film thickness on defects and the graphitization of nanothin carbon coatings used for metallic bipolar plates in proton exchange membrane fuel cells. ACS Applied Materials & Interfaces, 2018, 10(40): 34561-72.
25. Zhang Weixin, Yi Peiyun, Peng Linfa, Lai Xinmin. Strategy of alternating bias voltage on corrosion resistance and interfacial conductivity enhancement of TiCx/a-C coatings on metallic bipolar plates in PEMFCs. Energy, 2018, 162: 933-43.
26. Liang Peng, Qiu Diankai, Peng Linfa, Yi Peiyun, Lai Xinmin, Ni Jun. Contact resistance prediction of proton exchange membrane fuel cell considering fabrication characteristics of metallic bipolar plates. Energy Conversion and Management, 2018, 169: 334-44.
27. Qiu Diankai, Peng Linfa, Liang Peng, Yi Peiyun, Lai Xinmin, Mechanical degradation of proton exchange membrane along the MEA frame in proton exchange membrane fuel cells. Energy, 2018, 165: 210-222.
28. Qiu Diankai, Peng Linfa, Yi Peiyun, Lai Xinmin, Lehnert W, Flow channel design for metallic bipolar plates in proton exchange membrane fuel cells: Experiments. Energy Conversion And Management, 2018,174: 814-823.
29. Yu Haidong, Zhao Chunzhang, Lai Xinmin. Compliant assembly variation analysis of scalloped segment plates with a new irregular quadrilateral plate element via ANCF. Journal of Manufacturing Science and Engineering, 2018, 140(9): 091006.

2017年代表性论文
30. Deng Yujun, Peng Linfa, Lai Xinmin Lai, Fu Mingwang, Lin Zhongqin. Constitutive modeling of size effect on deformation behaviors of amorphous polymers in micro-scaled deformation. International Journal of Plasticity, 2017, 89: 197-222.
31. Bi Feifei, Hou Kun, Yi Peiyun, Peng Linfa, Lai Xinmin. Mechanisms of growth, properties and degradation of amorphous carbon films by closed field unbalanced magnetron sputtering on stainless steel bipolar plates for PEMFCs. Applied Surface Science, 2017, 422: 921-931.
32. Jiang Tianhao, Peng Linfa, Yi Peiyun, Lai Xinmin. Investigation of deformation behavior of SS304 and pure copper subjected to electrically assisted forming process. Journal of Manufacturing Science and Engineering, 2017, 139(1): 011004.
33. Qiu Diankai, Peng Linfa, Yi Peiyun, Lai Xinmin. A micro contact model for electrical contact resistance prediction between roughness surface and carbon fiber paper. International Journal of Mechanical Sciences, 2017, 124: 37-47.
34. Wang Jin, Yi Peiyun, Deng Yujun, Peng Linfa, Lai Xinmin, Ni Jun. Recovery behavior of thermoplastic polymers in micro hot embossing process. Journal of Materials Processing Technology, 2017, 243: 205-216.
35. Yi Peiyun, Zhang Chengpeng, Peng Linfa, Lai Xinmin. Flexible silver-mesh electrodes with moth-eye nanostructures for transmittance enhancement by double-sided roll-to-roll nanoimprint lithography. RSC Advances, 2017, 7(77): 48835-48840.
36. Zhang Chengpeng, Yi Peiyun, Peng Linfa, Lai Xinmin, Chen Jie, Huang Meizhen, Ni Jun. Continuous fabrication of nanostructure arrays for flexible surface enhanced Raman scattering substrate. Scientific Reports, 2017, 7: 39814.
37. Zhang Chengpeng, Zhu Yuwen, Yi Peiyun, Peng Linfa, Lai Xinmin. Fabrication of flexible silver nanowire conductive films and transmittance improvement based on moth-eye nanostructure array. Journal of Micromechanics and Microengineering, 2017, 27(7): 075010.
38. Bi Feifei, Li Xiaobo, Yi Peiyun, Hou Kun, Peng Linfa, Lai Xinmin. Characteristics of amorphous carbon films to resist high potential impact in PEMFCs bipolar plates for automotive application. International Journal of Hydrogen Energy, 2017, 42(20): 14279-14289.
39. Yu Haidong, Zheng Bin, Lai Xinmin. A modeling study of welding stress induced by friction stir welding. Journal of Materials Processing Technology, 2017, 254(4): 213-220.
40. Peng Linfa, Xu Zhutian, Fu Mingwang, Lai Xinmin. Forming limit of sheet metals in meso-scale plastic forming by using different failure criteria. International Journal of Mechanical Sciences, 2017, 120: 190-203.

2016年代表性论文
41. Peng Linfa, Mao Mengyun, Fu Mingwang, Lai Xinmin. Effect of grain size on the adhesive and ploughing friction behaviors of polycrystalline metals in forming process. International Journal of Mechanical Sciences, 2016, 117: 197-209.
42. Bi Feifei, Peng Linfa, Yi Peiyun, Lai Xinmin. Multilayered Zr–C/a-C film on stainless steel 316L as bipolar plates for proton exchange membrane fuel cells. Journal of Power Sources. 2016, 314: 58-65.
43. Peng Linfa, Wu Hao, Shu Yunyi, Yi Peiyun, Deng Yujun, Lai Xinmin. Roll-to-roll hot embossing system with shape preserving mechanism for the large-area fabrication of microstructures. Review of Scientific Instruments, 2016, 87(10): 105120.
44. Wu Hao, Yi Peiyun, Peng Linfa, Lai Xinmin. Study on bubble defects in roll-to-roll UV imprinting process for micropyramid arrays I. experiments. Journal of Vacuum Science & Technology, 2016, 34(2): 021201.
45. Peng Linfa, Wu Hao, Yi Peiyun, Lai Xinmin. Study on bubble defects in roll-to-roll UV imprinting process for micropyramid arrays II: Numerical study. Journal of Vacuum Science & Technology, 2016, 34(5): 051203.
46. Mao Mengyun, Peng Linfa, Yi Peiyun, Lai Xinmin. Modeling of the friction behavior in metal forming process considering material hardening and junction growth. Journal of Tribology, 2016, 138(1): 012202.

1）课程名称：现代汽车制造   
    授课对象：本科生  
    学时数：48    
    学分：3
2）课程名称：误差分析与测试数据处理   
    授课对象：硕士 
    学时数：48    
    学分：2

1. 高深宽比金属薄板微细结构的加工装置及方法，ZL 201611091387.1
2. 提高燃料电池金属双极板表面镀层致密和耐腐蚀的方法，ZL 201610645062.7
3. 一种带有减反功能的全方位防窥膜及其制作工艺，ZL 201610120360.4
4. 一种纳米孔结构全方位防窥膜及其制作工艺， ZL 201610120721.5
5. 金属板料单向拉伸过程温度变化的预测方法，ZL 201610053427.7
6. 一种具有减反性能的表面蒸镀铝防窥膜及其制作工艺，ZL 201610120356.8
7. 用于制备燃料电池金属双极板非晶碳膜磁控溅射连续线，ZL 201610984083.1
8. 燃料电池金属极板用碳化物和金属氧化物复合涂层及制备，ZL 201510057049.5
9. 基于三维异质铺粉的功能梯度零件增材制造方法，ZL 201510088107.0
10. 带有蛾眼结构的反光膜及其制备工艺，ZL 201510866506.5
11. 异种金属电弧胶焊连接系统及方法，ZL 201510126204.4
12. 用于燃料电池金属极板的石墨烯复合涂层及其制备方法，ZL 201510399192.2
13. 摩擦力测量装置及测量方法，ZL 201510224903.2
14. 面向超高强度钢与轻金属的自冲铆接装置及方法，ZL 201410546467.6
15. 大型薄壁筒形构件自动对接装配的协同定位装置，ZL 201410444407.3
16. 柔性剪切分离模具，ZL 201310687344.X
17. 一种燃料电池大面积金属双极板连续冲压成形模具，ZL 201310051905.7
18. 一种燃料电池双极板的激光胶焊方法，ZL 201210034944.1
19. 一种全液压驱动辊型微细压印装置，ZL 201210049165.9
20. 燃料电池超薄金属双极板自适应激光焊接夹具，ZL 201210195617.4
21. 聚合物薄膜类产品微细结构卷对卷热辊压成形装置，ZL 201210208492.4
22. 一种燃料电池金属双极板碳铬阶梯镀层及其制备方法，ZL 201210289381.0
23. 带有导电耐腐蚀镀层的燃料电池金属双极板及其制备方法，ZL 201210438569.7
24. 基于卷对卷热辊压聚合物薄膜表面微结构加工装置及方法 ，ZL 201210292620.8
25. 一种车用燃料电池的大面积金属双极板，ZL 201210509907.1
26. 燃料电池电堆的自动化装配装置，ZL 201110065618.2
27. 直接电阻局部加热的金属表面压印成形装置，ZL 201010136555.0
28. 电流辅助的燃料电池超薄金属双极板压焊装置及其方法，ZL 201010525736.2
29. 用于燃料电池的金属气体扩散层及其制备方法，ZL 201010605127.8

1）2020年 - 至今：中国机械工程学会极端制造分会理事
2）2006年 - 至今：中国汽车工程学会车身技术分委会委员   
3）2005年 - 至今：中国工程机械学会理事

2019年，上海市科学技术奖特等奖（排1）
2017年，中国汽车工业技术发明奖（排1）
2015年，教育部自然科学奖一等奖（排1）
2014年，上海市优秀学术带头人
2011年，国家科技进步奖二等奖（排4）
2009年，“长江学者”奖励计划特聘教授
2008年，通用汽车中国高校汽车领域创新人才
2004年，教育部新世纪人才计划
2002年，上海市曙光学者计划
2002年，国家科技进步奖二等奖（排5）

2017年，上海交通大学首届教书育人一等奖
2014年，“全国大学生小平科技创新团队”指导老师
2013年，第三届上海交通大学“凯源十佳”教师